Re in"Car"nation High Performance

Video of my personal ride strutting her stuff...

Last and best dyno pull on my personal 460 project.

Walk around after first lite off of project 12.99 LTD.

Video of our testing program for the 2006 EMC 434 CHI headed "Clevor"

First dyno pull at "EMC" 2006

Dean Baker running an RHP built 557.

Dean Baker RHP built 557 Dyno pull. HP peak at a low 5,900 rpm for good street manners.

Richards truck in action. 545 inch stroker with RHP D0VE's, custom solid flat tappet and dizzy. Right on!!!

Kevin shot this start up and walk around video of his RHP build 528 iron cj stroker.

Jeff McCue's yellow bomb sporting a 15" vacuum rule 545 with RHP large valve iron Dove heads and custom solid roller.

Taking a ride in Mark Laczo's truck "Tuff Enough" powered by a 557" stroker with RHP ported iron CJ heads and our custom solid roller cam. Just shy of 850 HP on the dyno.

Mark Laczo in "tough enough" running against another RHP client Myron Krahn (far lane) sporting a 532 inch BBF stroker with ported TFS Streets and a custom solid roller making a bit over 810 HP.

Best ET 12.019, 1977 460 and C6 automatic from a van, 212 dur at .050 cam, 8.75 compression, 3.50 gears, full exhaust
This is a 12.3 run with iron heads. Now runs consistent 12.0's with RHP Edelbrock heads. Add some cam and compression and this little stang would really Gallop...